Daewoo Puma 350A CNC Turning Center with 15" Chuck, Tailstock and Chip Conveyor
LOT No: 25Category: 2-Axis Turning Center
Server time
---
buyer premium 15.000%
will be charged on this item
tax 7.525%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
03/19/2019 12:01:00 AM CT
Date Ending
04/02/2019 10:11:00 AM CT
Time Remaining
bidding completed
Current High Bid
$4,025.00
# of bids
18
Curr. High Bidder
v****h
First Bid
$1,000.00
Item Location
Becker, MN
Country
US
Lot 25: Daewoo Puma 350A CNC Turning Center with 15" Chuck, Tailstock and Chip Conveyor
Equipped With:
Mitsubishi Meldas 520L CNC Control, Kitagawa B-215 15" 3-Jaw Chuck, 12 Station Turret, Tailstock with Programmable Quill / Sliding Body, Coolant System, Turbo Chip Conveyor, Tool Presetter, RS 232 Port, Floppy Disk Drive, Assorted Turet Tool Holders, Machine Manuals.
Electrics:
200/220 Volt, 3 Phase
Manufacturer: Daewoo Model: Puma 350A Year: 1997 Serial Number: PM250135
Main Unit Approx Weight: 19000.00 lbs
Main Unit Dimensions (in inches): Length: 153.00" Width: 98.00" Height: 96.00"
Components:
Chip Conveyor: Length: 144.00" Width: 48.00" Height: 64.00"
Specs:
Control: Mitsubishi 520L CNC Control
Max Swing Over Bed: 27.5"
Max Swng Over Saddle: 18.9"
Max Turning Diameter: 12.4 "
Max Turning Length: 41.4"
Spindle Speeds: 30 - 3000 RPM
Spindle Drive: 35 HP
Number of Steps: 2 Speed Geared
Spindle Nose: A2-8"
Max Bar Capacity: 3.58"
Hole Thru Spindle: 4.02"
Hole Thru Draw Tube: 3.85"
Turret Capacity: 12 Positions
Turret Travels (X,Z): 14.3" x 43.5"
Rapid Traverse Rate (X/Z): 630 / 790 IPM
Tailstock?: Yes
Tailstock Travel: 39.4"
Tailstock Quill Diameter / Taper: 4.7" / MT #5
Tailstock Quill Travel: 4.7"
Seller Company: Synergies LLC - Engineering Office & Coatings Facility
Seller Contact: DAVE COWLES Phone: (612) 328-2299
Item Location: Tavis Metals Division of Synergies, LLC, 12900 Prosperity Ave, Becker, MN 55308
Location Contact: Machinesused.com . Phone: (763) 745-1166
Inspection Date & Time: Friday, March 29th, 2019 9AM to 4PM or By Appointment
Dock Door: Ground Level
Loading Dock: Ground Level
Removal Dates and Times: This item must be removed between Monday, April 8, 2019 and Wednesday, April 10, 2019
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, April 3, 2019
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY WEDNESDAY APRIL 10TH, 2019
- ALL PAYMENTS DUE BY Wednesday April 3, 2019
Riggger is required for removal of items requiring forklift.
Rigger On-Site for Removal Days:
R&R Machinery Movers
9000 Science Center Drive, Suite B
New Hope, MN 55428
Brian Bester
Cell Phone: 612-770-2598
Office Phone: 651-457-0227
Email: ap.rrmachinerymoving@gmail.com
Bidding Complete
Current Bid: $4,025.00
Bid Increment: $25.00
Minimum Bid: $4,050.00
Bidding Completed