Shigiya GPS 30-100 CNC Plain Cylindrical Grinder with Fanuc Power Mate Control, Marposs Gaging, Motorized Work Head, Hydraulic Tailstock, Coolant System
LOT No: 14Category: CNC Cylindrical, Plain
Server time
---
buyer premium 15.000%
will be charged on this item
tax 7.000%
will be charged on this item
additional
fees applicable
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
09/24/2024 12:00:00 AM CT
Date Ending
10/08/2024 10:40:19 AM CT
Time Remaining
bidding completed
Current High Bid
$9,000.00
# of bids
51
Curr. High Bidder
G****S
First Bid
$100.00
Item Location
Fridley, MN
Country
US
Lot 14: Shigiya GPS 30-100 CNC Plain Cylindrical Grinder with Fanuc Power Mate Control, Marposs Gaging, Motorized Work Head, Hydraulic Tailstock, Coolant System
Equipped With:
Fanuc Power Mate CNC Control, Marposs Gaging, Motorized Work Head, Hydraulic/Manual Tailstock, Coolant System with Paper Filtration and Magnetic Separation,
Description:
NOTE: Wheel Spindle Lubrication Pump/Motor Need Repair
Electrics:
220 Volt, 3-Phase
Manufacturer: Shigiya Model: GPS 30 100 Year: 2000 Serial Number: 100364
Main Unit Approx Weight: 11000.00 lbs
Main Unit Dimensions (in inches): Length: 171.00" Width: 80.00" Height: 75.00"
Components:
Coolant System: Length: 60.00" Width: 28.00" Height: 25.00"
Hydraulic System: Length: 24.00" Width: 20.00" Height: 20.00"
Specs:
Control: Fanuc Power Mate
Swing Over Table: 300mm
Distance Between Centers: 1000mm
Max Grind O.D: 300mm
Max Workmass: 150kg
Swivel Angle: NA
Wheel Size OD x W: 405 x 50 x 152.4mm
Max Peripheral Speed: 33m/sec
Manual Infeed Amount: .0001mm
Rapid Approach Stroke: 40mm
Min. Input Increment: .0001mm
Workhead Type: Motorized
Workhead Spindle Speed: 15 to 600 RPM
Workhead Center Hole Taper: MT4
Tailstock Type: Lever / Hydraulic
Tailstock Spindle Stroke: 30mm
Tailstock Center Hold Taper: MT4
Table Swivel Angle CCW: 8.5 Degrees
Table Swivel Angle CW: 0 Degrees
Table Min. Input Increment: .0001mm
Wheel Spindle Motor: 3.7KW
Seller Company: Multisource Manufacturing, LLC -Fridley
Seller Contact: Ohio Jokinen Phone: (763) 571-7480
Item Location: Multisource Manufacturing, LLC -Fridley, 7500 NE Commerce Ln, Fridley, MN 55432
Location Contact: Ohio Jokinen Phone: (763) 571-7480
Inspection Date & Time: By Appointment with Sellers Normal Business Hours, Monday-Friday
Dock Door: 144" x 144" Doors
Loading Dock: Ground Level, Paved Lot
Removal Dates and Times: This item must be removed between Tuesday, October 8, 2024 and Friday, October 18, 2024
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, October 9, 2024
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY Friday, October 18, 2024
- ALL PAYMENTS DUE BY Wednesday, October 9, 2024
Cullinan Rigging will be the exclusive rigger for machines located in Fridley, MN. Removal will take place November 21st and 22nd 2024. A price for a lift-and-load will be posted prior the end of the auction. Machines not removed on those two days will be moved to Cullinan's facility for a fee.
Preparation for safe transport is the responsability of the buyer. The seller will drain coolant and disconnect from supply power.
Prep Fee: $200.00
Bidding Complete
Current Bid: $9,000.00
Bid Increment: $25.00
Minimum Bid: $9,025.00
Bidding Completed