Hardinge GS-200 CNC Turning Center with Fanuc 0i-TC CNC Control, 8" Chuck, 12-Station Turret, Tailstock, LOW HOURS
LOT No: 105Category: 2-Axis Turning Center
Server time
---
buyer premium 15.000%
will be charged on this item
tax 8.125%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
01/14/2025 12:00:00 AM CT
Date Ending
01/28/2025 10:00:00 AM CT
Time Remaining
---
Current High Bid
$0.00
# of bids
0
Curr. High Bidder
First Bid
$1.00
Item Location
Anoka, MN
Country
US
Lot 105: Hardinge GS-200 CNC Turning Center with Fanuc 0i-TC CNC Control, 8" Chuck, 12-Station Turret, Tailstock, LOW HOURS
Equipped With:
Fanuc Oi-TC CNC Control, Kitagawa B-208 8" 3-Jaw Chuck, 12 Station Automatic Tool Turret, Programmable Tailstock, 2.05" Bar Capacity, 1,181 IPM Rapid Traverse Rate, Roll-Out Chip Pan / Coolant System, (2) Boring Holders, (2) Turning Holders
Description:
Fanuc Oi-TC CNC Control, Kitagawa B-208 8" 3-Jaw Chuck, 12 Station Automatic Tool Turret, Programmable Tailstock, 2.05" Bar Capacity, 1,181 IPM Rapid Traverse Rate, Roll-Out Chip Pan / Coolant System, (2) Boring Holders, (2) Turning Holders
Electrics:
220 Volt, 3 Phase
Manufacturer: Hardinge Model: GS-200 Year: 2007 Serial Number: BLBA710161
Main Unit Approx Weight: 6520.00 lbs
Main Unit Dimensions (in inches): Length: 79.00" Width: 65.00" Height: 77.00"
Components:
Coolant/Chip System: Length: 56.00" Width: 21.00" Height: 17.00"
Specs:
Control: Fanu OiTC
Max Swing Over Bed: 18"
Max Turning Diameter: 11"
Max Turning Length: 15.98"
Spindle Speeds: 5,000 Max RPM
Spindle Drive: 15 HP
Spindle Nose: A2-6
Hole Thru Draw Tube: 2.05" Bar Capacity
Turret Capacity: 12 Stations
Turret Index Time: .46 Seconds
Turret Travels (X,Z): 6.023" x 16"
Rapid Traverse Rate (X/Z): 1,181 IPM
Tailstock?: Yes
Tailstock Travel: 13.425"
Tailstock Quill Travel: #4MT
Seller Company: Anoka Technical College
Seller Contact: KEITH BARRY Phone: (763) 433-1100
Item Location: Anoka Technical College, 1355 West Highway 10, Anoka, MN 55303
Location Contact: KEITH BARRY Phone: (763) 433-1100
Inspection Date & Time: By Appointment with Sellers - Normal Business Hours M-F
Dock Door: 14' x 14' Ground Level Door, Paved Lot
Loading Dock: 8' x 8' Truck Level with Paved Lot
Removal Dates and Times: This item must be removed between Tuesday, January 28, 2025 and Friday, February 7, 2025
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, January 29, 2025 4PM CT
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY Friday, February 7, 2025
- ALL PAYMENTS DUE BY Wednesday, January 29, 2025 4PM CT
Buyer is Responsible for Prep and Removal of Item. Rigger is required to load this Item. Buyer responsible for Rigger. Suggested Riggers: CLICK HERE
Bid NOW
Current Bid: $0.00
Bid Increment: $1.00
Minimum Bid: $1.00