DMG Mori Seiki NLX2500SY/700 CNC Lathe, Sub-Spindle, Live Milling, Y Axis, C-Axis, LNS Bar Feed (New 2013)
LOT No: 120Category: CNC Lathe, Sub-Spindle, Single Turret, Live Tool
Server time
---
buyer premium 15.000%
will be charged on this item
tax 8.125%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
01/21/2025 12:00:00 AM CT
Date Ending
02/04/2025 10:00:00 AM CT
Time Remaining
---
Current High Bid
$0.00
# of bids
0
Curr. High Bidder
First Bid
$1.00
Item Location
Lino Lakes, MN
Country
US
Lot 120: DMG Mori Seiki NLX2500SY/700 CNC Lathe, Sub-Spindle, Live Milling, Y Axis, C-Axis, LNS Bar Feed (New 2013)
Equipped With:
Mori Seiki M730 BM CNC Control, Main Spindle with C-Axis, Sub-Spindle with C-Axis, 12 Station Live Milling Tool Turret, Y-Axis Programmable Turret, Chip Conveyor, L Shaped, Coolant System, Parts Catcher / Conveyor, S30 Collet Closer on Main, 3 J Collet Closer, 10" 3 Jaw Chuck, 6" 3 Jaw Chuck, Bolt-on Turret Tool Holders, LNS Quickload Servo 80S2 Magazine Bar Loader (Serial: 27095501 (2013), 1- Live Axial Double Double End Tool Holder, 1-Live Radial Tool Holder, Front Tool Pre Setter, Read Tool Pre Setter, Chiller, Spindle Liners Assorted. Manuals. NOTE: Factory Shipping Brackets Have Been Installed on this Machine - Ready for Shipping!
Electrics:
200/220 Volt, 3 Phase
Manufacturer: DMG Mori Seiki Model: NLX 2500SY/700 Year: 2013 Serial Number: NL254131012
Main Unit Approx Weight: 14000.00 lbs
Main Unit Dimensions (in inches): Length: 128.00" Width: 83.00" Height: 97.00"
Components:
LNS Barfeed: Length: 81.00" Width: 63.00" Height: 56.00"
Chip Conveyor- L Shaped: Length: 132.00" Width: 77.00" Height: 74.00"
Parts Conveyor: Length: 102.00" Width: 17.00" Height: 22.00"
Accessories Pallet: Length: 48.00" Width: 48.00" Height: 48.00"
Specs:
Control: Mori Seiki M730 BM CNC Control
Max Swing Over Bed: 23.23" / 590 mm
Max Swing Over Cross Slide: 14.17" / 360mm
Max Turning Diameter: 18.11" / 460mm
Max Turning Length: 31.3" / 795mm
Sub-Spindle Travel: 28.9" / 734mm
Spindle Nose: JIS A2-8
Main Bar Capacity: 3.15" / 88mm
Main Spindle Speeds : 4,000 Max RPM
Main Spindle Orientation: C-Axis (.001 Degree)
Sub-Spindle Speeds : 6,000 Max RPM
Sub-Spindle Orientation: C-Axis (.001 Degree)
Sub-Spindle Nose: JIS A2-5
Sub-Spindle Bar Capacity: 1.69" / 43mm
Turret Capacity: 12 Station - Live Milling Capable
Turret Travels (X/Z): 10.24" x 31.3" / 260mm x 795mm
Y-Axis Travel: +/- 1.97" / 50mm
Rapids: 1,181 IPM X/Z Axes
Y-Axis Rapid Traverse Rate: 393.7 IPM
Live Tool Speeds: 6,000 RPM Max
Live Tool Drive Motor: 7.5 HP / 5.5 kW
Main Spindle Drive: 25 HP / 18.5 kW
Sub-Spindle Drive : 15/10 HP / 11/7.5 kW
Seller Company: Progressive Engineering Technologies
Seller Contact: Machinesused.com Auction Phone: (763) 745-1166
Item Location: Progressive Engineering Technologies, 450 Apollo Drive, Lino Lakes, MN 55014
Location Contact: Machinesused.com Auction Phone: (763) 745-1166
Dock Door: 12' x 12' Ground Level Door
Loading Dock: Ground Level, Paved Lot
Removal Dates and Times: This item must be removed between Monday, February 10, 2025 and Wednesday, February 12, 2025
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, February 5, 2025
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY Wednesday, February 12, 2025
- ALL PAYMENTS DUE BY Wednesday, February 5, 2025
Bid NOW
Current Bid: $0.00
Bid Increment: $1.00
Minimum Bid: $1.00