Hurco VMX30 CNC Vertical Machining Center, Hurco WinMax CNC Control, 12,000 RPM Spindle, Chip Conveyor
LOT No: 280Category: CNC Vertical Machining Center, Bed Type
Server time
---
buyer premium 15.000%
will be charged on this item
tax 6.000%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
02/18/2025 12:00:00 AM CT
Date Ending
03/04/2025 11:16:18 AM CT
Time Remaining
bidding completed
Current High Bid
$6,250.00
# of bids
61
Curr. High Bidder
J****m
First Bid
$1.00
Item Location
Plymouth, MN
Country
US
Lot 280: Hurco VMX30 CNC Vertical Machining Center, Hurco WinMax CNC Control, 12,000 RPM Spindle, Chip Conveyor
Equipped With:
Hurco Winmax Ultimax CNC Control, 12,000 RPM Spindle, CAT 40 Spindle Taper, 24 Station Side Mount Twin Arm Tool Changer, Chip Conveyor, Standard Coolant System, Harbor Chiller Unit NOTE: Tooling/Vises NOT Included in Sale
Electrics:
230 Volt, 3 Phase
Manufacturer: Hurco Model: VMX30 Year: 2008 Serial Number: M342-06018028EHA
Main Unit Approx Weight: 10500.00 lbs
Main Unit Dimensions (in inches): Length: 89.00" Width: 92.00" Height: 98.00"
Components:
Chip Conveyor: Length: 118.00" Width: 21.00" Height: 59.00"
Coolant Tank: Length: 78.00" Width: 26.00" Height: 30.00"
Chiller: Length: 15.00" Width: 8.00" Height: 38.00"
Specs:
Machine Control: Hurco WinMax Ultimax CNC
Table Size: 40"x20"
Machine Travels (X/Y/Z): 30"/20"/24"
Table Capacity: 3000 lbs
Spindle Taper: Cat 40
Spindle Speeds: 12,000 RPM
Rapid Traverse Rate (X/Y/Z): 1378/1378/1181
Tool Changer Style: Side Mount
Tool Changer Capacity: 24
Spindle Drive: 18 / 20 HP
Power Requirement: 230 Volt, 3 Phase
Seller Company: Graham Research
Seller Contact: JOHN HUSTON Phone: (763) 553-1339
Item Location: Graham Research, 13305 Industrial Park Blvd., Plymouth, MN 55441
Location Contact: Jim Leseman Phone: (763) 553-1339
Inspection Date & Time: Friday, February 28, 2025 9AM to 4PM
Dock Door: 144" x 144"
Loading Dock: Ground Level w Ramp, Paved Lot
Removal Dates and Times: This item must be removed between Friday, March 14, 2025 and Friday, March 14, 2025
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, March 5, 2025 - 4PM CT
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY Friday, March 14, 2025
- ALL PAYMENTS DUE BY Wednesday, March 5, 2025 - 4PM CT
This Item is located at Graham Research, Rigging Available on Friday March 14th 8am-4pm, 2025
On-Site rigger is available to load this Item. Buyer is responsible for prep and removal. Buyer responsible for contacting rigger.
TK Rigging- Quoted $600 to load.
Blake Klinkner
Phone: 612-720-1243
Fax: 651-688-9280
Email: blake@tkriggingmn.com
Bidding Complete
Current Bid: $6,250.00
Bid Increment: $25.00
Minimum Bid: $6,275.00
Bidding Completed