Daewoo Lynx 210A CNC Turning Center with Tailstock and Chip Conveyor
LOT No: 9Category: 2-Axis Turning Center
Server time
---
buyer premium 15.000%
will be charged on this item
tax 8.525%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
10/29/2024 12:00:00 AM CT
Date Ending
11/12/2024 10:19:25 AM CT
Time Remaining
bidding completed
Current High Bid
$4,275.00
# of bids
49
Curr. High Bidder
N****1
First Bid
$1.00
Item Location
Fridley, MN
Country
US
Lot 9: Daewoo Lynx 210A CNC Turning Center with Tailstock and Chip Conveyor
Equipped With:
Boring Bars, Stick Tools and Mist Collector NOT Included
Fanuc i Control, 6" 3-Jaw Chuck, 12 Station Turret, Tailstock, Tool Presetter, Chip Conveyor, Coolant System, RS232 Port
Electrics:
220 Volt, 3-Phase
Manufacturer: Daewoo Model: Lynx 210A Year: 2004 Serial Number: L2104193
Main Unit Approx Weight: 7000.00 lbs
Main Unit Dimensions (in inches): Length: 114.00" Width: 65.00" Height: 68.00"
Specs:
Max Swing Over Bed: 18.11"
Max Turning Diameter: 11.02"
Max Swng Over Saddle: 13.78"
Control: Fanuc i Series Control
Max Turning Length: 11.81"
Spindle Nose: A2-5
Spindle Speeds: 60 - 6,000 RPM
Hole Thru Spindle: 2.09"
Hole Thru Draw Tube: 1.77"
Spindle Drive: 15HP
Turret Capacity: 12 Stations
Turret Travels (X,Z): 6.3" x 13"
Rapid Traverse Rate (X/Z): 629 / 944 IPM
Turret Index Time: .15 Seconds Per Swivel
Tailstock?: Yes
Tailstock Quill Diameter / Taper: 2.56" w #4MT
Tailstock Quill Travel: 3.15"
Seller Company: Multisource Manufacturing, LLC -Fridley
Seller Contact: Ohio Jokinen Phone: (763) 571-7480
Item Location: Multisource Manufacturing, LLC -Fridley, 7500 NE Commerce Ln, 763-496-5675 (Pat Castleberry), Fridley, MN 55432
Location Contact: Ohio Jokinen / Pat Castleberry Phone: (763) 582-1036
Inspection Date & Time: November 8th, 2024 - 9AM to 4PM
Dock Door: 144" x 144" Doors
Loading Dock: Ground Level, Paved Lot
Removal Dates and Times: This item must be removed between Thursday, November 21, 2024 and Friday, November 22, 2024
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by November 13th, 2024, BY 4 PM
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY November 27th 2024
- ALL PAYMENTS DUE BY November 13th, 2024, BY 4PM_
Cullinan Rigging will be the exclusive rigger for machines located in Fridley, MN. Removal will take place November 21st and 22nd 2024. Cullinan has quoted $975 to load this machine onto an open truck/trailer during the removal days. Machines not removed on those two days will be moved to Cullinan's facility for a fee.
Preparation for safe transport is the responsability of the buyer. The seller will drain coolant and disconnect from supply power.
Bidding Complete
Current Bid: $4,275.00
Bid Increment: $25.00
Minimum Bid: $4,300.00
Bidding Completed