Haas SL-30 2-Axis CNC Turning Center with Tool Presetter, Chip Auger
LOT No: 20Category: 2-Axis Turning Center
Server time
---
buyer premium 15.000%
will be charged on this item
tax 7.000%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
11/19/2024 12:00:00 AM CT
Date Ending
12/10/2024 10:00:00 AM CT
Time Remaining
---
Current High Bid
$0.00
# of bids
0
Curr. High Bidder
First Bid
$100.00
Item Location
Janesville, IA
Country
US
Lot 20: Haas SL-30 2-Axis CNC Turning Center with Tool Presetter, Chip Auger
Equipped With:
Haas Coldfire CNC Control, Chip Auger, Manual Tool Presetter, High Intensity Lighting, Intuitive Programming, USB, Kitagawa 10” 3-Jaw Chuck
Description:
Note: Machine disconnected from power and not bracketed, Probe arm is in need of repair - Latest PM stated home switch is not functioning
Electrics:
208/230 Volt 3 Phase
Manufacturer: Haas Model: SL-30 Year: 2007 Serial Number: 3072281
Main Unit Approx Weight: 16000.00 lbs
Main Unit Dimensions (in inches): Length: 126.00" Width: 83.00" Height: 74.00"
Components:
Coolant Tank : Length: 128.00" Width: 32.00" Height: 28.00"
Specs:
Control: Haas CNC with Coldfire
Max Swing Over Bed: 30"
Max Swng Over Saddle: 14.5"
Max Turning Diameter: 17"
Max Turning Length: 34"
Spindle Speeds: 3400 rpm
Spindle Drive: 30 HP
Spindle Nose: A2-6
Hole Thru Spindle: 3.0"
Hole Thru Draw Tube: 2.56"
Turret Capacity: 12 Stations
Turret Travels (X,Z): 11.3" x 34"
Rapid Traverse Rate (X/Z): 710 in/min x 710 in/min
Turret Index Time: 1 sec
Seller Company: Ohler Pump A Div of W.S. Darley and Co.
Seller Contact: KELLY BROWN Phone: (319) 987-2121 ext. 138
Item Location: Ohler Pump A Div of W.S. Darley and Co., 501 Maple St, Janesville, IA 50647
Location Contact: KELLY BROWN Phone: (319) 987-2121 ext. 138
Inspection Date & Time: By Appointment with Sellers - Normal Business Hours M-F
Dock Door: 14'w x 14'H Door
Loading Dock: Ground level
Removal Dates and Times: This item must be removed between Tuesday, December 10, 2024 and Friday, December 20, 2024
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com before item removal.
- All Payments are Due to Machinesused.com by December 11th, 2024 by 4 pm
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY December 20th 2024
- ALL PAYMENTS DUE BY December 11th, 2024 by 4 pm
Buyer is Responsible for Prep and Removal of Item. Rigger is required to load this Item. Buyer responsible for Rigger. Suggested Riggers: CLICK HERE
Recommended Rigger: BW Contractors, Inc. Cedar Falls, IA 50613 319 987 2070
Bid NOW
Current Bid: $0.00
Bid Increment: $1.00
Minimum Bid: $100.00