YCM XV560A CNC Vertical Machining Center with 10k Spindle, Chip Conveyor, Side Mount Tool Changer, Cat 40 Spindle Taper
LOT No: 3Category: Vertical, Bed Type
Server time
---
buyer premium 15.000%
will be charged on this item
tax 8.525%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
10/29/2024 12:00:00 AM CT
Date Ending
11/12/2024 10:15:28 AM CT
Time Remaining
bidding completed
Current High Bid
$4,275.00
# of bids
64
Curr. High Bidder
M****C
First Bid
$100.00
Item Location
Fridley, MN
Country
US
Lot 3: YCM XV560A CNC Vertical Machining Center with 10k Spindle, Chip Conveyor, Side Mount Tool Changer, Cat 40 Spindle Taper
Equipped With:
Fanuc MSP 200i Control, 10,000 RPM Spindle, Cat 40 Spindle Taper, Sidemount Twin Arm ATC, Remote Jog Hahdle Chip Conveyor, Coolant System with Skimmer. Note Vises, Tool Holders and Mist Collector NOT Included
Electrics:
220 Volt, 3-Phase
Manufacturer: YCM CNC Model: YCM-XV560A Year: 2005 Serial Number: 412642
Main Unit Approx Weight: 6700.00 lbs
Main Unit Dimensions (in inches): Length: 74.00" Width: 84.00" Height: 100.00"
Components:
Coolant Tank / Chip Conveyor: Length: 40.00" Width: 96.00" Height: 50.00"
Specs:
Machine Control: Fanuc MXP-200i
Table Size: 27.6" x 16.5"
Machine Travels (X/Y/Z): 22" x 16.1" x 17.7"
Spindle To Table Distance: 4.3" - 22"
Spindle Center to Column Distance: 17.7"
Table Capacity: 660 Lbs.
Spindle Taper: Cat 40
Spindle Speeds: 10,000 RPM
Rapid Traverse Rate (X/Y/Z): 1418 ipm X&Y, 945 ipm Z
Maximum Cutting Feed Rate: 0.04-394 ipm
Tool Changer Style: Side Mount Twin Arm
Tool Changer Capacity: 20
Max Tool Length: 9.8"
Max Tool weight: 13.2 Lbs.
Spindle Drive: 15 HP
Power Requirement: 208/230
Seller Company: Multisource Manufacturing, LLC -Fridley
Seller Contact: Ohio Jokinen Phone: (763) 571-7480
Item Location: Multisource Manufacturing, LLC -Fridley, 7500 NE Commerce Ln, 763-496-5675 (Pat Castleberry), Fridley, MN 55432
Location Contact: Ohio Jokinen / Pat Castleberry Phone: (763) 582-1036
Inspection Date & Time: November 8th, 2024 - 9AM to 4PM
Dock Door: 144" x 144" Doors
Loading Dock: Ground Level, Paved Lot
Removal Dates and Times: This item must be removed between Thursday, November 21, 2024 and Friday, November 22, 2024
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by November 13th, 2024, BY 4 PM
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY November 27th 2024
- ALL PAYMENTS DUE BY November 13th, 2024, BY 4PM_
Cullinan Rigging will be the exclusive rigger for machines located in Fridley, MN. Removal will take place November 21st and 22nd 2024. Cullinan has quoted $975 to load this machine onto an open truck/trailer during the removal days. Machines not removed on those two days will be moved to Cullinan's facility for a fee.
Preparation for safe transport is the responsability of the buyer. The seller will drain coolant and disconnect from supply power.
Bidding Complete
Current Bid: $4,275.00
Bid Increment: $25.00
Minimum Bid: $4,300.00
Bidding Completed