Okuma LT10-MY 7-Axis CNC Turning Center
Machine Control: Okuma OSPU-100L CNC Control
Max Swng: 15.75"
Distance Between Spindle Centers: 37.80"
Max Bar Capacity: 2"
Spindle Speeds: 50-6000 RPM Main & Sub Spindles
Spindle Index: C-Axis on Main Spindle & Sub Spindle
Max Turning Diameter: 8.27"
Number of Turrets: (2) Turrets
Turret Capacity: 12 Stations, All Stations Live Capable
Live Milling Speeds: 50-6000 RPM
Turret 1 Travels (X/Z): 6.57" (X) / 27.56" (Z) / 3.15" (Y)
Turret 2 Travels (X/Z): 7.56" (Turret X)/ 28.74" (Sub Spindle Z)
Spindle Drive(s): 10HP Main & Sub Spindles
Okuma OSPU-100L CNC Control, ATS-22J Collet Chucks on Main & Sub, (1) 8" Kitagawa 3-Jaw Chuck, 12 Station Upper and Lower Tool Turrets, All Stations Live Capable on Both Turrets, Y Axis on Upper Turret, Main and Sub Spindles with C-Axis on Both, Parts Catcher, Chip Conveyor, LNS Quickload Servo S2 Magazine Barfeeder, Machine Manuals. Tooling: Approximately 5 Turning Holders, (4) Dual Sided Turning Holders, (6) Dual Direction Combination Boring & Turning Holders, (3) Axial Live Tool Holders, (6) Radial Live Tool Holders, (9) Boring Holders, (1) Bar Puller.
Okuma OSPU-100L CNC Control, ATS-22J Collet Chucks on Main & Sub, (1) 8" Kitagawa 3-Jaw Chuck, 12 Station Upper and Lower Tool Turrets, All Stations Live Capable on Both Turrets, Y Axis on Upper Turret, Main and Sub Spindles with C-Axis on Both, Parts Catcher, Chip Conveyor, LNS Quickload Servo S2 Magazine Barfeeder, Machine Manuals. Tooling: Approximately 5 Turning Holders, (4) Dual Sided Turning Holders, (6) Dual Direction Combination Boring & Turning Holders, (3) Axial Live Tool Holders, (6) Radial Live Tool Holders, (9) Boring Holders, (1) Bar Puller.
208 Volt 3 Phase