Romi Flat Bed Engine Lathe with Fanuc 21i-T CNC Control
Control: Fanuc 21i-T CNC Control
Swing Over Ways: 16.9"
Swing Over Cross Slide: 8.0"
Max Center Distance: 40"
Center Height: 8.5"
Hole Through Spindle: 2.09"
Swing Over Bed: 16.9"
Spindle Nose: A2-5
Spindle Speeds: 4 - 4,000 RPM
Rapid Traverse Rates (X/Z): 295 / 395 IPM
Tailstock Quill Travel: 4.7"
Tailstock Quill Taper: MT #4
Swing Over Bed: 16.9"
Spindle Drive: 10 HP
Fanuc Series 21i-T CNC Control, Compact Flash Card RS232, 4,000 Max RPM, 10 HP Spindle Drive, Standard & Metric Threading, Buck Forkardt 6" 3-Jaw Chuck, 5C Air Collet Closer, Aloris Tool Post, Tailstock, Standard Coolant Pump & Tank, Manuals & Parameters.
Fanuc Series 21i-T CNC Control, Compact Flash Card RS232, 4,000 Max RPM, 10 HP Spindle Drive, Standard & Metric Threading, Buck Forkardt 6" 3-Jaw Chuck, 5C Air Collet Closer, Aloris Tool Post, Tailstock, Standard Coolant Pump & Tank, Manuals & Parameters.
208 Volt 3 Phase.