42cf94e3fba5619326c70fa7bede344f.jpg895d77ddc2cccfdbc98233545200b1cf.jpg3416509b709da595955c3245b4909f77.jpgbec1134074b231bd8d65a2a74ffa2d54.jpg3b3df8ac9047fe2db733932391679182.jpg
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System
Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System

Haas GT-20 CNC Chucker, 8 Station Tool Turret, 5C Closer - LOW Hours, 5C Closer, Coolant System

Stock: 7163Manufacturer: Haas Model: GT-20Age: 2007

Machine Control: Haas CNC Coldfire Processor

Swing Over Bed: 13"

Nominal Work Size: 11"

Z-Axis Travel: 12"

X-Axis Travel: 6"

Spindle Nose: A2-6

Spindle Bore: 3"

Spindle Speed: 3,000 RPM

Spindle Drive: 20 HP

Rapid Travrse Rate X / Z: 710 ipm

Max Chuck Size: 8"

Swing Over Cross Slide: 9.25"

VIDEOS

Request A Quote
Equipped With:

Haas CNC Control with Coldfire Processor, 5C Collet Closer, Coolant System (5 Gallon Tank), 8 Station Tool Turret, Bolt-On Turret Boring Tool Holders, Turret Turning Clamps, Spindle Orientation, Intuitive Programming, Remote Foot Trip for Hydraulic Collet Actuator, USB Port, Enclosure - ONLY 435 Spindle Hours!

Electrics:

208/230V, 3 Phase

VIDEOS