Chevalier FSG-3A1224 3-Axis Automatic Surface Grinder with Incremental Downfeed, Electromagnetic Chuck and Coolant System
Table Working Surface: 12" x 24"
Max Chuck Size: 12" x 24"
Max Table Movement (Manual): 27.5" Longitudinal Hand Travel
Max Table Travel Powered: 25.375"
Max Distance Spindle / Wheel to Table: 24.75" Max Spindle Center to Table
Crossfeed Travel Auto / Manual: 14.125" / 14.5"
Auto Longitudinal Feed Rate: 16-82 FPM Variable
Cross Feed Automatic Increments: .04 - .47"
Cross Feed Rapid Traverse Rate: 56 IPM
Auto Wheelhead Downfeed Increments: .0001" -.002"
Hand Wheelhead Downfeed Increments: .0005" Per Granduation / .08" Per Revolution
Max Table Load (Including Chuck): 924 Lbs.
Max Wheel Size : 14" Diameter x 2" x 5" Hole
Wheel Speed: 1,750 RPM
Rapid Wheelhead Feed Rate: 13 IPM
Spindle Drive: 5 HP
Hydraulic Motor: 2 HP
Wheelhead Elevation Motor: .25 HP
Crossfeed Motor: 0.1 HP
Chevalier 3-Axis Control, 12" x 24" Fine Pole Variable Electromagnetic Chuck, Fully Automatic 3-Axis Operation with Surface and Plunge Grinding Cycles, Rapid and Fine Wheelhead Adjustment, Hydraulic System, Hydraulic Wheel Dresser, Paper Filtration Coolant System and Tank, Wheel Hubs, Machine Manual.
230 Volt, 3-Phase