Hurco PA65-25 CNC Hydraulic Press Brake, 71 Ton x 98", Hurco AutoBend 7 Control and Back Gauge, Large Assortment of Dies
Control: Hurco Autobend 7 CNC Control of Ram and Backgauge
Tonnage Capacity: 71 US / 65 Metric Tons
Bending Capacity: 8' x 14 Gauge
Bed and Ram Length: 98.43" (2500mm)
Distance Between Housings: 85"
Ram Approach Speed: 106 IPM
Bending Speed(s): 17 IPM
Ram Return Speed: 142 IPM
Programmable Controlled Axes: Y (Ram) X, R (Backgauge Vertical)
Programmable Backgauge Distance: 24"
Throat Depth: 15.75"
Maximum Ram Stroke: 3.94"
Max Open Height: 14.6"
Closed Height: 11.81"
Drive Motor: 4.0 HP
Hurco Hydraulic Press Brake with Hurco Autobend 7 Controls is an up-acting hydraulic press brake. Model PA65-25 has a 71 US Ton Capacity and a 98" Bed and Ram.
Hurco Autobend VII CNC Control, Programmable Upacting Ram, Programmable X and R Axis Backgauge, Ram Clamps, Lower Die Holders, Tonnage Controls, Ram Tilt Control, Large Assortment of Dies and Die Holders, Remote Foot actuator, Manuals.
Machine: 230/460V 3 Phase
Control: 115 V Single Phase