Mazak Integrex 200-IV ST CNC Multi-Axis Mill-Turn Lathe with B-Axis Milling Head, Sub Spindle, Lower Turret, and Mazak FLEX-GL150F Gantry Load/Unload System
Control: Mazatrol Matrix CNC Control with Voice Advisor
Max Swing / Max Swing Over Cross Slide: 26"
Max Machining Diameter Upper / Lower: 26" / 10.6"
Max Machining Length: 58.86"
Maximum Bar Capacity: 2"
Main Spindle Chuck Size: 8"
Main Spindle Speeds: 35-5,000 RPM
Main Spindle Nose / Bore: A2-6
Main Spindle Indexing: Full C-axis (0.0001 Degree)
Main Spindle Drive: 30 HP
Second Spindle Chuck Size: 8"
Second Spindle Speeds: 35-5,000 RPM
Second Spindle Indexing: Full C-Axis (0.0001 Degree)
Sub Spindle Drive: 25HP
Second Spindle Headstock Stroke (W Axis): 61.02"
Second Spindle Rapid Traverse Rate: 1,181 IPM (W)
Milling Head Speeds: 12,000 Max RPM
Milling Head B-Axis Programmable: 225 Degrees (120 Deg Left / 105 Deg Right)
Milling Head Travel X / Z / Y: 22.83" x 60.82" x +/- 3.15"
Milling Head Drive: 25 HP
Milling Head Taper: KM63 Taper
Rapid Traverse Rates Milling Head (X / Z): 1,496 IPM
Automatic Tool Changer Capacity for Milling Head: 40 Station Automatic Tool Changer
Tool Changer Speed: 1.3 Seconds Tool to Tool
Max Tool Diameter/ Length / Weight: 3.54" or 4.92" x 11/81" Length, 22 Lbs.
Lower Turret Travels: 5.91" x 58.66"
Lower Turret Capacity: 9 Stations
Lower Turret Index Time: .14 Seconds Per Step
Lower Turret Rapid Traverse Rate (X / Z): 1,496 IPM
Cooolant Capacity: 120 Gallons
Mazak Mazatrol Matrix CNC Control, Mazak FLEX-GL150F Gantry Load/Unload System, 8" 3-Jaw Chucks on Main and Sub Spindle, Full C-Axis on Main & Sub Spindles, 12,000RPM B-Axis Milling Head, KM63 Taper Spindle with 40 Station Automatic Tool Changer, 8-Station Lower Turret with Live Milling, Automatic Tool Presetter, PCMCIA Card Slow, USB Port, EIA/ISO Programming, 3D Coordinate Conversion, Rigid Tapping on Both Spindles, Chiller Unit, Coolant System and Tank, Approximately 100-150 KM63 Tool Holders Included, Machine Manuals.
400 Volt 3 Phase