Metal Muncher MM-70A-18 70 Ton Hydraulic Ironworker
Max Tonnage Capacity: 70 Ton
Throat: 18"
Open Height: 18"
Stroke Length: 9"
Ram Shaft Diameter: 3"
Speed (Strokes Per Minute): 40 at 1/2
Work Station Height: 30"
Platen Table Size: 11" x 48"
Punch Capacity: 7/8" Thru 1" / Maximum Hole with Special Tooling: 4-1/2 Thru 3/16"
Coper / Notcher Capacity: 3" x 3" x 3/8"
Flat Shear Capacity: 24"
Flat Shear with Optional 5" Short Blades: 1" x 7", 3/4" x 12", 3/8" x 20", 1/4" x 24"
Bar Shear Capacity: Round/Bar: 1/4" to 1 1/8"
Angle Shear Capacity: 4" x 4" x 3/8"
Drive Motor: 7.5 HP
Complete 5-Station Fabrication Center with: Punch Station, Plate Shear Station, Angle Shear Station, Bar Shear Station, Coper Notcher Station, Assortment of Punches, Uni-Punches, Shear Blades, and other Misc. Tooling & Hardware as shown in pics, Foot Pedal, Hydraulic Pump, Manuals & Documentation
Complete 5-Station Fabrication Center with: Punch Station, Plate Shear Station, Angle Shear Station, Bar Shear Station, Coper Notcher Station, Assortment of Punches, Uni-Punches, Shear Blades, and other Misc. Tooling & Hardware as shown in pics, Foot Pedal, Hydraulic Pump, Manuals & Documentation
208-230/460V, 3Ph Currently wired 460V.